How to Replacing The Base Panel Dell Alienware 13

Do you has any problem about your Dell Alienware 13 Laptop? Before bring to Service center, maybe you want to try repair? To repair your laptop, you must removing the base panel first. In this post I share how to replacing the base panel Dell Alienware 13. I hope this post can resolve your problem.

WARNING: Before working inside your computer, read the safety information that shipped with your computer and follow the steps in Before Working Inside Your Computer. After working inside your computer, follow the instructions in After Working Inside Your Computer. For more safety best practices, see the Regulatory Compliance home page at dell.com/regulatory_compliance.

Removing the Base Panel:
Procedure
1.  Close the display and turn the computer over.
2.  Loosen the captive screws that secure the base panel to the computer base.
3.  Using a plastic scribe, gently release the tabs that secure the base panel to the computer base.

1. computer base
2. captive screws (2)
3. base panel
4. plastic scribe











4.  Disconnect the battery cable from the battery-cable connector.

1 battery cable
2 battery-cable connector











5.  Turn the computer over.
6.  Press and hold the power button for 5 seconds to ground the system board.


Replacing the Base Panel
Procedure
1.  Connect the battery cable to the battery-cable connector.
2.  Align the tabs on the base panel with the slots on the computer base and snap the base panel into place.
3.  Tighten the captive screws that secure the base panel to the computer base.

This is how to removing and replacing the base cover Dell Alienware 13 Laptop. Thank You for read How to Replacing The Base Panel Dell Alienware 13 and your attention. I hope this can help your problem.